PIONEER F-F3-S/RLFPWXCN
Manual de Usuario

Listening to FM/AM

04

Preset stations
TUNING/PRESET

5 While the preset channel number is flashing, press one of the preset channel range (A to J) buttons to select the desired memory block (A to J). 6 While the preset channel number is flashing, either turn the TUNING/PRESET dial, press the ST +/� or Station call (1 to 10) button to select the desired preset channel (1 to 10).1 7 While the preset channel number is flashing, either press the TUNING/PRESET dial or the MEMORY button to store the station in the preset memory. � To preset other channels, repeat steps 2 to 6. � A total of 100 broadcast stations can be preset � 10 stations (channels 1 to 10) in each of blocks A to J.2

POWER
STANDBY AUTO TUNED STEREO

BAND

MENU

FM/AM TUNER F3

MPX

AUTO PRESET

OFF

ON

DIMMER

1 4 7
MEMORY

2 5 8 10

3 6 9

A/B/C D/E/F G/H I/J

A.PRESET/A.TUNE TUNE+

MENU STENTER BAND MPX TUNEST+

1 Use the �Auto tuning� or �Manual tuning� operation to tune in the station to be preset in the memory. 2 Press the MENU button to select menu.

3 Either turn the TUNING/PRESET dial or press the ST + or ST � button to select �Memory�. 4 Press the TUNING/PRESET dial or ENTER button to set the preset mode and make the preset channel number flash. � Steps 1 to 4 can be skipped when using the MEMORY button. When this button is pressed, the preset memory standby mode is set, regardless of the menu setting at that time.

English Deutsch Français Italiano Nederlands Español

Note
1 When the preset channel is A1, pressing the ST � button or rotating the TUNING/PRESET dial to the left will cause the preset channel to move to J10. 2 When a broadcast station is stored in memory, the MPX setting is simultaneously stored.

17
En