TV Function
Use the ��� buttons to select the item you want to set. Use the �, � buttons to select the item and enter it. Press the � button on the remote control to exit from the setup menu. Press the � button on the remote control to return to the picture setup menu. Signal Use the � direction button to select CATV TV signal input mode. Use the � direction button to select AIR TV signal input mode. Channel Use the �, � buttons to change the channel. In CATV input mode, you can select channels from 2 to 125; in AIR input mode, you can select channels from 2 to 69. Skip When the � button is pressed to turn the function ON, it will skip the current channel when using ��� to select channels. When the � button is used to turn the function OFF, it will play the channels in sequence when selecting under normal playback status. Fine Tuning Use the ��� buttons to select Fine Tuning, and then press the �, � buttons to tune forward or backward from the current channel Auto Memory Use the ��� buttons to select Auto Memory, press the OK button to enter auto memory mode:
SEARCHING EXIT�� -------------------------------------------CH�009
