RICOH FAX4800L
Manual de Servicio

July 6th, 1998

INSTALLING OPTIONAL UNITS

3.3.6 PAPER FEED UNIT (SIDE FLOW)
Installation Procedure 1. Put the machine on the paper feed unit [A], and remove the connector cover [B] (1 screw). 2. Secure the machine and the paper feed unit at the front side with the panel screw [C], spacer [D], and the collar [E]. NOTE: This step is not required for the H515 models. 3. Secure the rear side with the bracket [F] (2 screws). Then connect the harness [G] to the machine. 4. Install the harness cover [H] (1 screw), and replace the connector cover [B] (which was removed in step 1). 5. Load the paper and turn on the machine. Make a test print using the paper feed unit.

End of Procedure

[F] [E] [D] [C] [B]
Installation

[H] [G]
H110I501.WMF

3-13