TROUBLESHOOTING WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the warranty. If a fault occurs, �rst check the points listed before taking the set for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center. No power, or playback does not start � Insert the battery correctly. � Replace the battery. .� Connect the mains adapter securely. HoLd indication and/or no reaction to controls � Deactivate HOLD. No sound or bad sound quality � Press 2; to resume playback. � Adjust the volume. � The track is a data �le. Press § to skip to the next audio CD track. � Check and clean the LINE OUT/p connections. � Keep this set away from active mobile phones or strong magnetic �elds. no cd indication � Insert a disc, label upwards. � Clean or replace the disc . � Wait until the steamed up lens has cleared. nF dISC indication � Make sure the inserted CDR(W) is �nalized. dAtA indication � Make sure you have inserted an audio disc or an MP3-CD. Prot indication and music �le is not played � The music �le is protected. Make sure the protection option in your encoder software is deactivated when creating a music �le. � In this case you are responsible for adherenceto all local or international copyrights.
TROUBLESHOOTING SELECt indication � Select tracks for programming before you play your program. Music �le is not played � Wrong format used eg. VCD, word. Make sure the music �le names end with mp3 . Missing directories on MP3-CD � Make sure the total number of �les and albums on your MP3-CD does not exceed 350. � Only albums with MP3 �les are shown. The disc skips tracks � Clean or replace the disc � Make sure REPEAT, REPEAT ALL, SHUFFLE, SHUFFLE ALL or PROGRAM is switched off. Music is skipped or popping sound when playing an MP3 �le � If the problem persists, encode the audio track again and make a new CDROM. � CD damaged or dirty. Replace or clean CD. Music is interrupted and OOPS indication � Switch ESP on.
