JVC EX-A85US
Manual de Usuario

Listening to a radio broadcast
English
You can tune in to FM or AM.

Selecting a station

1

Press FM/AM.
Each time you press the button, the band will be alternated between FM and AM. Example:
Frequency

Cursor (5// )

2

Press TUNING or TUNING to select the station (frequency).
Automatic tuning: Hold down TUNING or TUNING until the system starts searching, and then release the button. When a station of sufficient signal strength is tuned in to, the system stops searching automatically. To stop searching manually, press TUNING or TUNING .

Setting the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. On the main unit ONLY:
F STANDBY/ON button
PHONES

Manual tuning: Each time you press TUNING or TUNING , the frequency changes. � When an FM stereo program is received, the �ST� (Stereo) indicator lights. � You can also select the station with cursor 5// . NOTE
If the stereo FM program currently tuned in to is noisy, you can improve the reception by pressing FM MODE to switch to the monaural mode (�MONO� lights). If you press FM MODE again, or tune in to another station, the receiving mode returns automatically to the stereo mode.

4¢

To select 10 kHz intervals, while holing down ¢ on the main unit in Standby mode, press F STANDBY/ON on the main unit to turn on the power. �10 kHz� appears on the display window. To select 9 kHz intervals, while holing down 4 on the main unit in Standby mode, press F STANDBY/ON on the main unit to turn on the power. �9 kHz� appears on the display window. NOTE
If the interval spacing is switched, the memory in which the radio stations were stored will be erased.

33