Operating sequence 1. Place the laundry in the drum
Open the loading door. Place the garments to be washed inside the drum one by one laying them as flat as possible. Close the door ensuring that the catch clicks into place.
P0004
5. Select the temperature
Press the temperature selector dial in to pop it out and turn it to the required value.
95
P0128
6. Select the required programme and start the machine
Plug into the mains. Turn on the water tap. Check that the drain hose is correctly positioned. Press the programme selector dial in to pop it out and then turn it clockwise until the programme coincides with the marker.
2. Measure out the detergent into the dispenser drawer
Pull out the detergent dispenser drawer from the control panel. Pour the detergent into the main wash compartment. Follow the detergent manufacturer�s guidelines for the amount required. P0006 If you wish to carry out the prewash, pour the amount of detergent required into the «prewash» compartment.
B
P0129
3. Add the liquid additive if required.
Pour the softener, if required, into the compartment marked . Do not exceed the MAX level.
Depress the ON/OFF button: the «mains on» light will come on and the machine starts operating.
P0045
7. At the end of the programme
P0005
4. Select the required option and the spin speed.
The appliance stops automatically. If a programme without draining of water has been selected, drain the water before opening the door. Wait one or two minutes before opening the door to give the electric locking mechanism time to release it. Release the ON/OFF button, the mains-on light goes out. Turn the water tap off and unplug the machine from the mains. Open the loading door and remove the laundry. Ensure that the drum is completely empty by turning it with one hand. Leave the door ajar for a while to eliminate the steam.
