WHIRLPOOL ET20NMXAW02
Manual de Usuario

Adjusting

the refrigerator

shelves

Adjust the shelves to match the way you use your refrigerator.

To remove shelves: 1. Remove items from shelf.
2. Titt shelf up at front. 3. Lii back of shelf. 4. Pull shelf straight out.

To replace shelves: 1. Guide the rear shelf hooks into the slots
in the shelf supports on cabinet wall. 2. Tilt shelf up at front until hooks drop into slots. Lower front of shelf to level position.

Removing

the meat drawer

and cover
Lii the front, then the back.

Remove the meat drawer and cover for cleaning or moving to another shelf, if desired. Remove the meat drawer first.

To remove the meat drawer: 1. Slide the drawer straight out to the stop.
2. Lii the front. 3. Slide drawer out the rest of the way. 4. Replace in reverse order.

To remove the cover: 1. Remove the meat drawer.
2. Tilt front of cover up. 3. Pull cover up and out.

To replace the cover: 1. Fit bottom notches of cover over rear and
center cross bars of shelf. 2. Lower cover into place. 3. Replace the meat drawer.

Pull out to the stop, lift the front and pull again.

Removing

the crispers

To remove the crispers: 1. Slide the crisper straight out to the stop.
2. Lift the front. 3. Slide out the rest of the way. 4. Replace in reverse order.

Pull out to the top, lift the front and pull again.

10