|
Usuarios conectados
Actualmente hay 5824 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Unplug the refrigerator
first.
I, Reach behrnd control console to find bulb 2 Remove bulb 3 Replace with a 40-w&t appliance bulb
Moving
the meat pan and cover...
Removing:
1. Sltde the purr> ou� to l:op 2. Lrtt the front of meat pan 3. Side pan ?he rest of the way out 4. TII: cover up at front 5 PUI! forward and out
The meat pan and cover can be removed for cleanina and moved to another shelf, if desired. Removethe meat pan first.
Replacing:
1. F!t notches underneath cover over rear and center cross bars on shelf 2. Lower cover In place. 3. Replace meat pan In reverse order
Adjusting the refrigerator
1 2. 3 4. Frrst, remove food from shelf Slrde shelf straight out to stop Lift front Slide the rest of the way out
shelves...
Guide Stop+ Shelf Sto-
Replacing
Shelf: I
Shelf Guide
1. Fit back of shelf on top of aurdes wrth wire stoos on the bottom of gurdes. 2 Lrft front, slrde shelf In until It clears guide stops
Removing crispers and crisper cover.. .
Pull Out to Stop. Lift the Front
Removing the Crispers:
1 Slide crisper strarght out to stop, Ikftfront, then slide the rest of the way out 2 Replace In the reverse order.
Removing Cover:
1 Push up glass Insert from bottom, then slrde out with both hands 2 Lift front of cover frame and remove cover support 3 Loftout cover frame by pulling up and out
Replacing
Remove the Glass Insert, Lift the Frame Front, then the Back. Glass is heavy.
Cover:
Be Careful.
1 Fit back of cover into notch supports on walls of refrigerator, then lower front Into place 2. Replace cover support with the long tab towards the front Note: If the support needs adjustment. turn base right to lower, or left to raise 3 Slide back of glass insert into place, then lower front
Removing and Adjusting
To remove shelf:
1. Lift front slightly 2. Lift back off supports. 3. Replace in reverse order.
the freezer shelf...
To adjust shelf:
I, 2. 3. 4. 6
Shelf support
Remove shelf Remove supports by slrding upwards. Replace supports on desired level, Replace shelf
|
|
|
> |
|