WHIRLPOOL ET16JKXBN01
Manual de Usuario

Adjusting

the crisper

cover

track

Because your crispers are not the same size, your crisper cover has an adjustable center track so you can switch positions of the crispers. You can adjust the center track with the cover in the refrigerator by removing the crispers and the cover insert.

To remove the center track: 1. Push up the cover insert from the bottom,
than slide out with both hands. 2. Gently pull up on front end of track. 3. Pull rear end of track out of opening in cover.

To replace the center track: 1. Insert rear end of track (with hole) into
opening in cover. 2. Lower front end of track into slot. 3. Make sure rear end of track has snapped into place on underside of cover.

Adjusting

the freezer

shelf

Adjust the freezer shelf to match the way you uw your freezer.

To mmovo the shelf: 1. Lii entire shelf slightly.
2. Move shelf all the way to one side. 3. Tilt other side up and out of shetf support 4. Pull shetf up and out.

To replace the sheW: 1. Tilt the shelf ad insert into freezer
compartment. 2. Insert ons end of the shelf all the way into the center of the shelf support cups. 3. Lower other and d shetf and insert into the shelf support cups. 4. Lower shelf into place. NOTE: The shalt should lower slightly and lock into plaoe. If the shelf does not appaar sturdy, make sure both ands of the shelf are inserted into the shelf support cups. 12