WHIRLPOOL ET14JKXXW00
Manual de Usuario

Ice cube trays...
(Model Ell4JK Only) if cubes are not used,they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get. To remove Ice: 1. Hold tray at both ends. 2. Twist slightly.

Automatic ice maker...
if you have the automatic ice maker accessory, or if you plan to add one later (Part No. ECKMF-B6), there are a few things you will want to know:
l

The ON/OFF lever is a wire signal arm. Down...for making ice automatically. Up...to shut off the ice maker. DO NOT TURN ICE MAKER ON UNTIL IT IS CONNECTED TO THE WATER SUPPLY. The dial or lever on the side of the ice maker changes the size ot the cubes. Shake the bin occasionally to keep cubes separated,and to obtain increased storage capacity.

LOWER
SIQNAL ARM TO START lT

l

l

l

l

l

l

l

it is normal for ice crescents to be attached corner. They will break apart easily. position. You will hear water running when ice maker is l if cubes are stored too long, they may develop working. You�ll hear ice fail into the bin. Don�t let an off-fiavor...iike stale water. Throw them away. these sounds bother you. They will be replaced. Cubes in the ice bin can The ice maker will not operate until the freezer also become smaller by evaporation. is cold enough to make ice. This can take . Good water quality is important for good ice overnight. quality. it is not recommended that the ice maker Because of new plumbing connections, the first be connected to a softened water supply. Water ice may be discolored or off-flavored. Discard softener chemicals such as salt from a maifuncthe first few batches of ice. tioning softener can damage the ice maker if ice is not being made fast enough and more mold and lead to poor quality ice. if a softened ice is needed, turn the Refrigerator Control towater supply cannot be avoided, then it is imporward a higher number, Wait a day and, if necestant that the water softener be well maintained sary, turn the Freezer Control toward A. and operating properly.

. if you remove the ice bin, raise the signal arm to shut off the ice maker. When you return the bin, by a push it ail the way in and iowerthe arm to the ON