Minimum level adjustment of gas oven burner
To reach the thermostat by-pass screw and adjust the minimum level, act as follows: � disconnect the appliance; � take out the knobs; � remove the front panel; � in case of conversion from natural gas to LPG, tightly screw the by-pass screw of thermostat (see fig.); � to convert from LPG to natural gas, unscrew the bypass screw, until a regular small flame is reached. � connect the appliance again; � ignite the gas oven burner; � turn the control knob to maximum position for at least 10 minutes; � finally check that turning quickly the tap from maximum position to minimum position, the flame does not go out; � reassemble the front panel and the knobs.
