ELECTROLUX EHGT318CX
Manual de Usuario

Building In

510
290

Dimensions are given in millimetres

These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. 8.

650 MIN.

Installation and assembly
These hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in Fig. 9. The edge of the cut out must have a minimum distance from the rear wall of 55 mm. If there are side walls, or sides of the furniture unit near the hob, the cut out edges must have a minimum distance of 100 mm. Hanging forniture units or hoods must be placed at 650 mm minimum from the hob. Carry out the building in of the hob as follows: 1. Put the relevant sealings, supplied with the hob, on the edges of the cut out, taking care that the sealings meet without overlapping; 2. place the hob in the cut out, taking care of its centring; 3. fix the hob with the relevant screws (Fig. 10). The traction of the screws is able to trace the sealing, any excess of which can then be easily removed.

49

0

55 27 0

40÷50

24

0

550 MIN
591

140

Fig. 9

If several 30cm hob are to be installed side by side into the same cut out, an assembly kit including a support side bracket and supplementary sealings is available at our After Sales Centres. The relevant installation instructions are supplied within the kit package.

a
FO 0199

a) sealing

Fig. 10

30
9