BEKO E1 CHASSIS
Manual de Servicio

Use the Program down button to select AUTOPROGRAM and press the OK button. Please Note: a) On the TV sets equipped with ATS a COUNTRY SELECTION menu will appear. Select the desired country using Program and Volume buttons. Press the OK button to select the country and press the OK button again the Automatic Tuning System regarding the broadcasting system in the desired country. b) On the TV sets without ATS pressing the OK button starts AUTOPROGRAM. When you are sure the aerial is connected properly press the OK button and to confirm it press OK button again. To cancel Autoprogram whilst it is working press the Menu button. As Autoprogram stores a channel it will appear briefly on the screen. Your TV is now tuned and ready to use E. TV SET UP The TV set up is accessed through a menu system. Once you have stored your set up, this is the set up the TV will default to when you switch it on. Please note If you do not press any buttons for 18-19 seconds the TV will exit the menu system. There are three menus; � Picture Menu � Setup Menu � Features Menu

� Picture Menu To reach the picture menu press one time to MENU button. BRIGHTNESS CONTRAST COLOUR SHARPNESS To change, for example, the colour, select it using Program down buttons. Use the Volume up and Volume down buttons to change the setting. To save your settings, select STORE and press the OK button. STORED will be displayed. Note: If you play NTSC formatted tape from the scart, the TINT menu will appear to adjust the TINT level. � Set up Menu Set up menu is explained above, under �Tuning the Television� topic � Features Menu To reach the feature menu press three times to MENU button.

a) Sleep Timer The sleep timer automatically switches the set to stand-by after the preset time has elapsed. You can select the time from 15 to 120 minutes with 15 minutes steps. There are two ways to set the sleep timer; 8