Troubleshooting > Procedure for Removing Disc from Faulty DZ-MV380A 1) Turn the hood (a) in the direction of the arrow to remove it. (See Fig. 4-8-1) 2) Remove three screws [A], and then remove the filter piece (b). Be careful not to scratch the lens surface with screwdriver at this time. 3) Remove the lens cover (c) in the direction of the arrow. 4) Remove the shoe cover in the direction of the arrow. 5) Remove four screws [X]. 6) Move the parts of the accessory shoe in the direction of the arrow.
1 (b) 3 (c) 6 (e) (d)
Fig. 4-8-1 How to Remove Disc 7) Insert a screwdriver, etc. into the hole in accessory shoe at the top of product, and move the lock arm (g) in the direction of the arrow to open the disc loading block. (See Fig. 4-8-2) 8) After removing the disc, close the disc loading block to protect the disc drive unit. When reinstalling removed components, use the reverse procedure to removal. 9) After work, reinstall part of accessory shoe and screws [X] to the accessory shoe: The accessory shoe is set as a service part, including screws [X].
