KENWOOD DVT-6200
Manual de Usuario

In case of difficulty
DVT-6200 (EN/K,E,X)

57

DVD player unit
Symptom
Playback does not start when the 6 key is pressed.

Cause
÷ There is no disc in the player. ÷ There are no signals recorded on the side of the disc being played. ÷ The TV is not turned on. ÷ The connection cords are not properly connected. ÷ The picture is slightly disrupted during fast forward and fast reverse operations. ÷ The audio output cords are not properly connected. ÷ The volume control of the TV or amplifier is not adjusted properly. ÷ The player is in a special playback mode. ÷ A nearby device is generating noise. ÷ The disc is dirty. ÷ The disc is damaged. ÷ There is condensation on the optical lens.

Remedy
÷ Load a disc and press the 6 key. ÷ Turn the disc over and properly place it on the disc tray. ÷ Turn on the TV. ÷ Properly reconnect the connection cords.

Playback starts but no image/sound is seen heard.

!
÷ This is not a malfunction. ÷ Properly connect the audio cords.

The picture is disrupted when the image is fast forwarded or fast reversed. No sound is heard.

!
÷ Set the sound volume to an appropriate level. ÷ Press the 6 key to resume normal playback mode. ÷ Separate this unit as far as possible from the device you think is generating the noise. ÷ Refer to the "Disc handling precautions" section and wipe dirt from the disc. 7 ÷ Use a new disc. ÷ Refer to the "Caution on condensation" section and evaporate the condensation. 7 ÷ Approximately 10 to 20 seconds are required for a disc to start playing, although the time differs depending on the disc. ÷ Properly place the disc on the tray. ÷ Refer to the "Video formats" section ,and use a disc with the appropriate video format for your TV or a TV with the appropriate video format for the disc. 0 ÷ The subtitle cannot be displayed when the DVD disc being played does not contain the recording of subtitles. ÷ Press the SUBTITLE key to switch on the subtitle mode. e ÷ The voice (or subtitle) language cannot be changed when the DVD disc being played does not contain the recording of more than one voice (or subtitle) language. ÷ The viewing angle cannot be changed when the DVD disc being played does not contain the recording of more than one angle. ÷ More than one viewing angle may be recorded only in limited sections in a disc.

The picture does not look good or the picture/sound quality is poor.

It takes a while for the disc to start playing.

÷ Time is required for the unit to detect the disc type and size and for the rotation of the motor to stabilize. This is not a malfunction. ÷ The disc is not placed horizontally. ÷ The video format of the disc being played does not match that of the connected TV monitor. ÷ The DVD disc being played does not contain the recording of subtitles. ÷ The subtitle mode is set to off.

The tray opens automatically. The top and bottom of the screen cannot be seen, or the screen becomes black-andwhite. The subtitle is not displayed.

The voice (or subtitle) language cannot be changed.

÷ The DVD disc being played does not contain the recording of more than one audio (or subtitle) language.

Knowledge

The viewing angle cannot be changed.

÷ The DVD disc being played does not contain the recording of more than one angle. ÷ You are attempting to switch the angle in a DVD section where more than one angle is not recorded.