PIONEER DVR310S
Manual de Servicio

5

6

7

8

8.3 REAR PART
A

B

1

VHF/UHF IN/OUT

Front panel connections

Connect your TV antenna to the VHF/UHF IN jack. The signal is passed through to the VHF/UHF OUT jack for connection to your TV.

2

Audio/video inputs 1 and 3

Two sets of audio/video inputs (stereo analog audio; composite and S-video video) that you can use to connect to satellite receivers, TVs, VCR or other source component for recording.

On the left side of the front panel a flip-down cover hides a third audio/video input, consisting of an S-video and standard (composite) video jack, and stereo analog audio jacks. On the right side is the DV input/output i.LINK connector. This is for connection to a DV camcorder.

C

3

Audio/video outputs 1 and 2

Two sets of audio/video outputs (stereo analog audio; composite and S-video video) that you can use to connect TVs or monitors.

4

COMPONENT VIDEO OUT

A high-quality video output for connecting to a TV or monitor with a component video input.

5

DIGITAL OUT OPTICAL

D

A digital audio output for connecting to an AV receiver, Dolby Digital/DTS decoder or other equipment with optical digital input.

6

CONTROL IN

Use to control this recorder from the remote sensor of another Pioneer component with a CONTROL OUT terminal and bearing the Pioneer � mark. Connect the CONTROL OUT of the other component to the CONTROL IN of this recorder using a mini-plug cord.
E

7

AC IN

Connect to a power outlet using the supplied power cable after making all other connections.

F

DVR-310-S
5 6 7 8

121