PIONEER DVR-230-S/YPWXV
Manual de Usuario

04

Getting started

Other settings you can make
After setting up using the Setup Navigator, you should be ready to start enjoying your DVD recorder. It�s possible, however, that you may want to make a couple of additional settings, depending on how the recorder is set up for terrestrial TV broadcasts. � Manual channel setting � This setting lets you skip channels where there is no station, as well as manually tune to stations. See Manual CH Setup on page 47. � Set Guide Preset � This setting lets you assign guide channels to ensure that the G-Code programming system works correctly. See Set Guide Preset on page 48.

Making your first recording
This quick guide shows you how to make a basic recording of a TV program to a recordable DVD. Recording is covered in much more detail in chapter 6 (Recording).

STANDBY/ON

CH+

CH�

ì REC

DVD RECORDER

1 If they aren�t already on, switch on your TV and this recorder. Press STANDBY/ON to switch on. � Make sure that the video input on your TV is set to this recorder. 2 Press OPEN/CLOSE (front panel only) to open the disc tray. 3 Load a blank DVD-R or DVD-RW disc with the label side face-up, using the disc tray guide to align the disc. � When you load a new, blank DVD-RW disc, the recorder will take a moment to initialize it for recording. 4 Use the CH +/� buttons to select the TV channel you want to record from. � You can also use the +/� buttons on the front panel if the recorder is stopped.

20
En