x DTS Selects the DTS signals to be output via the DIGITAL OUT OPTICAL and COAXIAL connectors. You cannot select this item when you set �DIGITAL OUT� to �OFF.� � OFF: when the player is connected to an audio component lacking a built-in DTS decoder. � ON: when the player is connected to an audio component having a built-in DTS decoder. If the player is connected to an audio component lacking a built-in DTS decoder, do not set this. Otherwise, when you play the DTS sound track, a loud noise or no sound will come out from the speakers, affecting your ears or causing the speakers to be damaged.
Note
Select the setting correctly. Otherwise, no sound or a strange sound will come out from the speakers, affecting your ears or causing the speakers to be damaged.
Controlling your TV or AV Receiver (Amplifier) with the Supplied Remote Z
If you adjust the remote signal, you can control your TV or AV receiver (amplifier) with the supplied remote. Default setting is to control Sony TVs with the mark.
TV @/1
1 2 5 8 0 3 6 9
Number buttons
4 7
Controlling TVs or AV receivers (amplifiers) with the remote
Hold down TV @/1, and enter your TV�s or AV receiver�s manufacturer�s code (see the table) using the number buttons. Then release TV @/1. Code numbers of controllable TVs or AV receivers (amplifiers) If more than one code number is listed, try entering them one at a time until you find the one that works with your TV or AV receiver (amplifier).
Notes
� If you enter a new code number, the code number previously entered will be erased. � When you replace the batteries of the remote commander, the code number reset to 01 (Sony). Reset the appropriate code number.
