NOTE ON MOUNTING THE GEARS
Mount the gear (chuck). (See Fig. 5) Rotate the gear (chuck) in the direction of the arrow. (down position) (See Fig. 5)
Gear (chuck)
Gear (swing)
5)
Mount the while aligning the engagement of the gear (swing) and the gear (chuck). (See Fig. 7)
Engagement the gear (swing) and the gear (chuck).
Gear (chuck)
Fig. 5.
3) 4)
Connect the boss of the gear (swing) with the groove of the rotary encoder and mount the gear (swing). (See Fig. 6) Align triangle mark of the chassis with the groove of the gear (swing). (See Fig. 6)
Align triangle mark of the chassis with the groove of the gear (swing). Gear (swing)
Fig. 7.
5.
Caution Point on the PWB IF-114
CAUTION When handling IF-114 PWB avoid contact with the sharp metal edge on the top side of Vacuum Fluorescent Display (ND401).
Gear (swing)
