PIONEER DVH-390MP
Manual de Usuario

Section

Radio operation

06

Listening to radio stations
1 Press SRC to select the tuner. 2 Press BAND repeatedly to select a band. The indicator lights in the following order. F1 (FM1)�F2 (FM2)�F3 (FM3)� MW (MW) 3 Auto Search: Press c/d (c/d on the remote control). When a station is received, searching stops. 4 Manual Search: Press and hold c/d (c/ d on the remote control) until MANUAL appears, and then press it repeatedly. The frequencies move up or down step by step.
# When not operated for six seconds after manual search, the ordinary tuner display is shown.

Notes ! Up to 18 FM stations, six for each of three FM bands and six MW stations can be stored in the memory. ! When a new station is stored in the preset station button, the previously preset station is automatically erased.

Auto search memory
This function lets you automatically store the six strongest broadcast frequencies. 1 Press a. The six strongest broadcast frequencies will be stored under preset buttons 1 to 6 in the order of their signal strength. 2 To cancel, press a.

Storing broadcast frequencies
You can easily store up to six broadcast frequencies for later recall at the touch of a button. 1 Press BAND to select desired band you want to store. 2 Select the desired frequency.

To scan the preset stations
1 Press b. Each preset station appears. 2 To cancel, press b.

English

To tune in the preset stations
1 Press BAND to select the desired band. 2 Press the desired preset buttons 1 to 6. The preset station of the preset buttons 1 to 6 is displayed and the preset station is received.

3 Press one of preset buttons 1 to 6 and hold until the beep sound. The number you have pressed will be displayed in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. 4 Repeat steps 1 to 3 to preset other stations. The next time, you press the same preset button, the radio station frequency is recalled from the memory.

En

19