SAMSUNG DVD-VR320
Manual de Servicio

Operating Instructions

6

Fill in the items using the ��� � buttons. � � : Moves to the previous/next item, �� 0~9 : Sets a value. � To : Select the media to record DVD or VCR. � Source : The video input source (AV 1, AV 2 ), or the broadcasting channel you want to make a timer recording of. � Date: Date that the timer recording starts � 01/31 01/30 :

� Recording mode (VCR)

AUTO : Select when you want to set video quality automatically. It depends on remaining time of VCR tape. SP : Standard Play, for best picture quality. SLP : Super Long Play, for maximum recording time (3 times SP).

7

Present Date

01/02 01/01 MON-FRI Sun's Mon's : Sat's �

Press the ENTER button. � will appear on the front panel. It means that a timer recording is registered. If the timer settings overlap The programs are recorded in order of priority. If timer recording is set for the first program and then again for the second program and both programs overlap, the following message will appear on the screen: �This setting is identical with 1.2� The message shows that the first program has priority. After recording of the first program is complete, the second program starts being recorded. To exit without saving the current setting

� Start/End Time : Start and end time of the timer recording.

� Recording mode (DVD) AUTO : Select when you want to set video quality automatically. In AUTO mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. Press the MENU or TIMER REC button. To return to the previous menu Press the RETURN button if you don�t want to set a timer recording.

Recording

This function is selected only one mode in XP,SP,LP and EP modes. And you can use this mode for timer recording. XP (high quality) : Select when audio and video qualities are important. (Approx. 1 hour)

8
Note

Turn the power off to finish the timer recording. � will blink if disc or tape is not inserted. The timer recording time may differ from the set time depending on disc status and overall timer recording status (for example, recording times overlapping, or when the previous recording ends within 3 minutes before the start time of the next recording.)

SP (standard quality) : Select to record in standard quality. (Approx. 2 hours) LP (low quality) : Select when a long recording time is required.(Approx. 4 hours) EP (extended mode) : Select when a longer recording time is required. (Approx.6 hours at 1.2 Mbps or Approx.8 hours at 0.8 Mbps )

Note

When you are recording at EP mode on a DVD-RW(V)/R disc, it may not record the full 6 or 8 hours because the unit uses the VBR(Variable Bit Rate) ENCODING system. For example, if you record a program with a lot of action, it uses a higher bit rate which in turn consumes more disc memory.

56 - English

13-46

Samsung Electronics