PHILIPS DVD616K/691
Manual de Usuario

Setup Menu
Video Out Setup
There are items included in VIDEO OUT PAGE menu as TV DISPLAY, VIDEO OUTPUT, TV TYPE BLACK LEVEL, VIDEO MODE, BRIGHTNESS, CONTRAST, SATURATION, HUE. Press STOP twice. Press SYSTEM MENU to enter its menu. Highlight the SETUP VIDEO OUTPUTitem by pressing the 34 keys. Press OK. WIDE(16:9)

1 2 3 4

4:3 NORMAL/LB

4:3 NORMAL/PS

Video output

1 2 3 4

In this menu, you can select the video output for high quality picture. Press the 34 keys to highlight VIDEO OUTPUT in the VIDEO OUTPUT PAGE menu. Press the OK key to open its submenu. Press the 2 key to highlight the item of the submenu. Press the 34 keys to choose an item. � S-VIDEO: Video signals will send an output from the S-VIDEO on the rear panel of the DVD player. � YCBCR: If your TV set is equiped with Y/CB/ CR input, you can choose for high quality picture. Press OK. Press the 1 key to return to the SETUP VIDEO OUTPUT menu. NOTE: Any selection will not influence the signal output of composite video.

Setup the item as follows,

1 2 3 4 5 6

Press the 34 keys to highlight the TV DISPLAY item in the SETUP VIDEO OUTPUT menu. Press the OK key. Enter its submenu by pressing the 2 key. Move the cursor by pressing the 34 keys to highlight the selected item. Press OK. Press the 1 key to return to the SETUP VIDEO OUTPUT menu.

TV type
Before viewing the DVD or VCD, ensure that the PAL or NTSC setting of the system matches your TV set.

5 6

1

TV display
Select the aspect ratio of the TV to be connected. WIDE � when you connect a wide-screen TV to the DVD player. NORMAL/LB � when you connect a normal TV to the DVD player. Displays a wide picture with bands displayed on the upper and lower portions of the TV screen. NORMAL/PS � when you connect a normal TV to the DVD player. Displays the wide picture on the whole TV screen with a por tion automatically cut off.

2 3 4 5 6

Press the 34 keys to highlight TV TYPE in the SETUP VIDEO OUTPUT menu. Press OK. Enter its submenu by pressing the 2 key. Move the cursor by pressing the 34 keys to highlight the requisite item. Press OK. Press the 1 key to return to the SETUP VIDEO OUTPUT menu. NOTE: Choosing NTSC item indicates that the player will output by NTSC system, Similarly, you can sacquire PAL system by choosing the PAL item. And the item MULTI means video output is depending on the format of DVD or VCD discs.

19

DVD616K IFU for /751

3141 016 18911