PIONEER DV-696AV-S/WVXZT5
Manual de Usuario

06

Audio Settings and Video Adjust menus

Chapter 6

Audio Settings and Video Adjust menus
Audio Settings menu
The Audio Settings menu offers features for adjusting the way discs sound. 1 Press HOME MENU and select �Audio Settings� from the on-screen display.
Audio Settings

Note � Audio DRC is only effective with Dolby Digital audio sources. � Audio DRC is only effective through the digital output when Digital Out is set to On, and Dolby Digital Out is set to Dolby Digital > PCM (see Digital Audio Out settings on page 39). � The effect of Audio DRC also depends on your speakers and AV receiver settings.

2 /

Select and change settings using the / (cursor) buttons, and ENTER.
Audio Settings Virtual Surround Audio DRC Dialog On Off

/

Virtual Surround
� Settings: On, Off (default) Switch on Virtual Surround to enjoy realistic surround sound effects from just two speakers. Tip

Audio DRC
� Settings: High, Medium, Low, Off (default) When watching Dolby Digital DVDs at low volume, it�s easy to lose the quieter sounds completely�including some of the dialog. Switching Audio DRC (Dynamic Range Control) to on can help by bringing up the quieter sounds, while controlling loud peaks. How much of a difference you hear depends on the material you�re listening to. If the material doesn�t have wide variations in volume, you may not notice much change.

� You can also use the SURROUND button on the remote control to switch Virtual Surround on. Note � 96 kHz linear PCM audio is automatically downsampled to 48 kHz if Virtual Surround is switched on. � The Audio Output Mode (see page 45) must be set to 2 Channel in order to be able to use Virtual Surround.

36
En