PIONEER DV-470-K/WYXCN/FG
Manual de Servicio

1

2

3

4

6.5 MECHANISM ADJUSTMENT
A

1 Tangential and Radial Height Coarse Adjustment START
� Remove the 03 SD Pickup Assy-S from the Traverse Mecha. Assy. � Remove the joint and the joint spring of the 03 SD Pickup Assy-S.

03 SD Pickup Assy-S

B

Note: Before removing the flexible cable for the pickup, soldering of the pickup circuit is necessary. For details, see "7.1.10 DISASSEMBLY".

Joint Joint Spring

� Pass through the guide shaft to a new 03 SD Pickup Assy-S. � Attach it to the Traverse Mecha. Assy.
C

03 SD Pickup Assy-S

Guide Shaft

D

� Put the joint between the Tangential (or Radial) adjustment screw and the mechanism base and turn each screw to adjust the height. (Refer to "6.1 ADJUSTMENT ITEMS AND LOCATION".)

Joint

7.5mm Mechanism base
E

� Attach the Traverse Mecha. Assy-S to the 04 LOADER Assy. � Turn it over and attach the joint and the joint spring. � Arrange the flexible cables. (Refer to "7.1.10 DISASSEMBLY".)

F

48
1 2

DV-470-S
3 4