7.1.9 DISASSEMBLY
Note: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures described here are common.
A
Diagnosis of the DVDM Assy
1 Bonnet and Tray Panel
(SCRB Assy) This is not installed in your product.
1 2 3 4 5 6
Remove the Bonnet by removing the five screws. Press the power. STANDBY/ON button to turn on the
26
Press the 0 button to open the Tray. Remove the Tray Panel. Press the 0 button to close the Tray. Press the power. STANDBY/ON button to turn off the
B
4 35 5
Tray Panel Tray
3
C
How to open the Tray when the power cannot be on
Insert a screwdriver (small) into the slit located at the bottom of the unit, and slide the projection of the Drive Gear in the Loading Mecha. Assy in the direction of the arrow, as indicated in the photo. If the Tray pops out a little, fully pull it out by hand.
