|
|
|
Usuarios conectados
Actualmente hay 5721 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Programming the commands of remote controllers for other devices into the remote controller
Erasing the programmed command from one button
You can only erase memorized commands and not preset ones.
SEND/LEARN indicator
MODE buttons
1. Press and hold down the desired MODE button for the command, press the ENT button, and then release both buttons.
When you press the MODE button, the SEND/LEARN indicator lights and that mode appears in the display. When you press the ENT button, the lamp turns off. When you release the buttons, the lamp lights again and �LEARN� appears in the display.
AUDIO TRACK DISC
MUTING
REC
OPEN/COLSE
2. Press and release the button for the command you wish to erase.
When you press the button, the SEND/LEARN indicator turns off and �RCV� appears in the display. When you release the button, the lamp lights again.
DVD
CD
T1
T2
TUN
PH
V1 STEREO
V2
V3 DSP
V�
DIRECT
3. Press and release the same button again.
The SEND/LEARN lamp flashes twice slowly and �CLEAR� appears in the display. The memorized command is erased.
ENT
1
SURROUND
2
THX
3
DSP
4
Re-EQ
5
CH SEL
6
LEVEL +
7
LATE NIGHT
8
DIMMER
9
LEVEL �
+ 10
0
ENT
HOME THEATER CONTROLLER
RC-418M
Note: If no button is pressed for more than 30 seconds during the programming, the SEND/LEARN indicator flashes three times quickly, �ERROR� appears in the display, and the remote controller exits the programming mode. Resume from Step 1.
Erasing all the commands programmed under a MODE button
SEND/LEARN indicator
1. Press and hold down the desired MODE button, press the ENT button twice, and then release both buttons.
MODE buttons
When you press the MODE button, the SEND/LEARN indicator lights and that mode appears in the display. When you press the ENT button, the lamp turns off. When you release the buttons, the lamp flashes twice slowly and then lights again.
AUDIO TRACK DISC
MUTING
2. Press and release the same MODE button again.
When you release the button, the SEND/LEARN indicator flashes twice slowly. This erases all the commands memorized to the MODE button. Notes: � If no button is pressed for more than 30 seconds during the programming, the SEND/LEARN indicator flashes three times quickly and the remote controller exits the programming mode. Resume from Step 1.
ENT
REC
OPEN/COLSE
DVD
CD
T1
T2
TUN
PH
V1 STEREO
V2
V3 DSP
V�
DIRECT
1
SURROUND
2
THX
3
DSP
4
Re-EQ
5
CH SEL
6
LEVEL +
7
LATE NIGHT
8
DIMMER
9
LEVEL �
+ 10
0
ENT
� If you perform an invalid operation during programming, the SEND/LEARN indicator flashes three times quickly, �ERROR� appears in the display, and the remote controller exits the programming mode. Resume from Step 1. � If many commands have been programmed to the MODE button, then the SEND/LEARN indicator may remain lit for some time during Step 2. This is not a malfunction.
HOME THEATER CONTROLLER
RC-418M
63
|
|
|
> |
|
