10 Decoder Software Upgrade
Your receiver's software may be upgraded. To check whether a new software version is available for your receiver, select the Decoder Status from the Installation submenu. Then, select the Decoder Upgrade item from the Decoder Status submenu. If new software exists, you will be prompted to press OK to initiate the upgrading process.
Also, when you switch your receiver into the standby mode, the check is made whether new software version is available. If new software is detected, either the upgrade is made in the standby mode (the Auto Upgrade option is set to Yes), or you are informed about upgrade availability when you switch your receiver into the operate mode (the Auto Upgrade option is set to No). To modify the Auto Upgrade option, press the MENU key. From the Main Menu, select the Installation submenu and then select the Settings submenu. Next, select the Decoder Upgrade Settings item to get access to the Auto Upgrade item. Upgrade Can Be Initiated