PHILIPS DTR220/05
Manual de Usuario

Notes with regard to the installation location - Install device on horizontal surface only. - Do not expose this device to extreme temperatures. Therefore: -Avoid direct solar radiation and radiator heat; -Do not obstruct the air ventilation by covering the ventilation openings with objects, like for example magazines, table cloths, curtains, etc.; -Leave a minimum clearance of approx. 40 cm above and to the sides. The heat may not accumulate in the device! Otherwise the heat can damage the device, and there is fire hazard! - The device may not be installed close to inflammable material (e. g. curtains, flammable liquids, etc.). Batteries - Batteries are to be kept away from children. - After swallowing a button cell or battery, the person concerned has to consult a doctor immediately. - Do not try to reactivate used batteries by heat, charging, or by other means. - Batteries may not be thrown into the fire, disassembled, or short-circuited. - Replace the batteries at least one a year to prevent them from leaking. - Always replace both batteries and use batteries of the same type only (e. g. alkaline cells or zinc/carbon). - If you are absent for a longer time, remove the batteries from the RC unit. Miscellaneous notes - Do not place open fire sources, like for example burning candles, on the device. - The antenna that is used has to be grounded. - Only switch the device on after the connections with the antenna and the SCART cable have been established. - The bottom side of the device features the device feet. Because the furniture or floor surfaces consist of various materials and are treated with various care products, it cannot be completely ruled out that some of these materials contain components affecting and moistening the feet of the device. If required, place a non-slip mat underneath the feet. - Opening the device results in loss of warranty. This symbol indicates that the adapter is a Class II appliance and does not require an earth connection. This symbol indicates that the adapter is for indoor use only. This symbol indicates that the adapter conforms to CE regulations.

Environmental Markings
English Your product has been designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product or his packaging, it means the product is covered by European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. The "Material recyclability symbol" affixed on package cardboard and user manual means these parts are recyclable. So do not dispose of them with your normal household waste. The "Material recyclability symbol" affixed on plastic packaging parts means these parts are recyclable.So do not dispose of them with your normal household waste. The "Green Dot" affixed on cardboard means PHILIPS pays a financial duty to the "Avoidance and Recovery of Packaging Waste" organization.

INTRODUCTION

5