Enjoying Surround Sound
Con�guring Subwoofer and Setting Up the Number of Speakers
The DVD receiver will provide you a full-�edged home theater, when it is added on extra speakers in addition to the two front speakers. (For information about how to add on, see page 25.) The factory default settings support the two channels with only a left and a right front speakers; you must con�gure the settings according to the number of the speakers you have added on.
5
Press / (repeatedly) to select the number of the connected speakers. 2ch: Only a left and a right front speakers. 5ch: A center speaker and a left and a right surround speakers in addition to a left and a right front speakers. Press RETURN. Returns to the display shown in step 1. Go to �Setting Distance of Speakers� at page 57.
6
RCV SETUP / RETURN / ENTER
Notes: � After you have changed the number of the connected speakers, you must con�gure the number, because the surround effect is subject to change according to the number of the combined speakers. � If you want to abort the setting, press �RCV SETUP�.
1
Press RCV SETUP. The display will show �1.Sp Con�g�.
2
Press ENTER. The display will show �Subwfr :No�.
3
Press / to switch �Yes� and �No�. Yes: Deep bass will be output from a subwoofer. No: Deep bass will not be output from a subwoofer. Con�gure the output setting for a subwoofer to �No� when the output from it is unneeded, even if it is connected. Press / to select �Speaker:�.
