SONY DRMV1S
Manual de Usuario

62

EN

EDITING

Tape Dubbing (From VCR To DVD)
Dubbing An Entire Cassette
Because this unit includes both DVD deck and VCR deck, you can easily use this unit for dubbing without connecting any other equipment.
� Turn on the unit. � Turn on the TV and select the video channel (or AV mode). � Slide the TV/CABLE/DBS/DVD switch to DVD.

1 For DVD deck

Load a recordable disc. For VCR deck Load a cassette you want to dub. 2 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. 3 Press REC MODE repeatedly to set the recording mode.

4 Press VCR] to select the dubbing direction.
� �VCR]� lights up on the unit.

5 Press and hold DUBBING for more than 2 seconds to start
� If the tape has not been rewound, the VCR deck rewinds the tape automatically. When the VCR deck has finished rewinding, dubbing begins automatically. � After dubbing is completed, the VCR deck rewinds the tape automatically and the unit shuts off. � To stop dubbing, press 8.

dubbing.

VCR ]

F-1

NOTES:
VCR/DVD

8

DUBBING

� If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to dub. It is recommended to conduct a test with unimportant cassettes first. � The superimposed indication during the operation or dubbing is not recorded. � It is not possible to dub a tape with a copy protection signal. � If the recording capacity of disc become full, the tape stops automatically. � It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing. � Dubbing is not possible on the discs used exclusively for On-Disc Timer Programing. � If the index code is found on a tape, a single title is created. While creating a title, the dubbing stops and then starts again. � When dubbing can not be performed properly, set �BLUE BACK� to �OFF�. ( pg. 76)

1 4 7

2 5 8 0

3 6 9

8 REC MODE