JVC DR-M1SLEF
Manual de Usuario

INITIAL SETTINGS

21
Before starting, make sure of the following:
� The TV aerial cable should be connected to the unit. � The unit�s mains power cord should be connected to a mains outlet. � Turn on the TV and select the AV mode. � Slide the TV/CABLE/SAT/DVD switch to DVD.

Auto Set Up
Auto Channel Set/Auto Clock Set/ Auto Guide Program Number Set
After the 1 button on the unit (or DVD 1 on the remote control) is pressed for the first time to turn on the unit, the Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.

A Turn on the unit.
On the unit Press 1 on the unit. On the remote control Press DVD 1 on the remote control.
� The AUTO SET/T-V LINK display appears on the TV screen.

B Perform Auto Set Up.
Press rt to move the arrow to �AUTO SET�, then press ENTER.

�AUTO� blinks on the front display panel; do NOT press any button on the unit or remote control until the front display panel shows �� �:� �� as illustrated on page 24.
� The AUTO SET screen will appear.

� When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable ( pg. 18) and the TV is turned on, the unit automatically performs the Preset Download ( pg. 23) even if you select �AUTO SET� for Auto Set Up function.