KENWOOD DPFR3010
Manual de Usuario

Editing
CD-206/204/203/DPF-R6010/R4010/R3010 (En)

Several CDs can be edited and recorded on 1 tape. Choose songs from each disc, and edit/record while confirming the remaining time on files A and B, respectively.

Hereafter the illustration of the common parts on the front panel is of CD-206/DPF-R6010.

21

REMOTE CONTROL UNIT

RC-P0601

: Keys and controls used in the operations described on this page.

MULTI EDIT (Except for CD-206/DPF-R6010) 1 Press so that the "MULTI EDIT " indicator light.
Do this operation in the stop mode.
EDIT
PGM MULTI EDIT DISC NO.

Light up.

1

2

3

4

5

Press twice

2 Enter the recording time of the tape.) 3 Select the desired track.
1 Select the disc (one disc only).
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

2 Select the tracks to be recorded.
Main unit
4 ¢

Remote control unit
1 2 3

÷ If you made a mistake, press the CLEAR key and select the correct track. ÷ The time remaining on side A or side B is indicated on the display. ÷ When the time left on side A is less than the play time of the selected song, that song will be programmed on side B. ÷ If �FULL� is displayed, no further programming can be accepted.

4

5

6

«
P.MODE

7

8

9

0

+10

4 Start recording.
When recording with a cassette deck equipped with CCRS function: Press the CCRS key (Cassette deck). When recording with a normal cassette deck: ÷ With the CCRS function, the recording starts after about 1 minute. ÷ If you have a cassette deck capable of Double-speed recording, use Normal-speed recording.

1 Adjust the recording levels. 2 Press the record key. 3 Play the CD.
÷ Change discs and, if the �b-01� indication is given when you first select a song, turn the tape to the start of side B.

5 Repeat step 3,4 above.