KENWOOD DPC-X337
Manual de Usuario

Power sources
Using the AC adaptor (For Europe)

Caution: Read this page carefully to ensure safe operation.

Playback from the first track
2 13
Connect the headphones

Programming tracks in desired order
To pause playback temporarily
Favorite tracks (max. 20 tracks) can be programmed in the desired order during stop mode for later playback.

This unit can be powered with 2 kinds of supplies including the batteries and household power line.

Rechargeable battery operation (For Europe)
Always use the specially provided rechargeable batteries NB3A70. Never use the batteries other than the batteries authorized by Kenwood.

4

PHONES jack (Green)

3Set the HOLD switch to off.

To change the programmed contents

To check the programmed contents Press the PROGRAM key during Stop status.
Track number

1Press the PROGRAM key

Blinks ÷ For the Hold function, read "Hold function".

5

÷ When the PLAY/PAUSE 38 key is pressed during playback, it pauses temporarily. ÷ Pressing the key again resumes playback.

1 22

21 3

�
To the DC IN jack AC power outlet

÷ Before any operation, be sure to set the HOLD switch to off (HOLD Off). When transporting the unit, it is recommended to set the HOLD switch in advance. In this way you can prevent unintended operation even when a key is pressed accidentally.

1Press the PROGRAM key

Blinks ÷ Stop status is engaged when the STOP 7 progress.

key is pressed while the program is in

Loading the batteries

To stop playback
Total number of tracks Blinks

The programmed track numbers will be displayed in sequence each time the PROGRAM key is pressed.

Programmed order

1Open the battery
AC power adaptor

cover.

2Insert 2 rechargeable

batteries and close the cover.

2Call the programmed order to be
changed.

÷ Stop status is engaged when the STOP 7 key is pressed while the program is in progress.

2

÷ Use the enclosed AC adaptor for this product.

1

1Slide the OPEN switch in the direction
of the arrow to open the top cover.

2Select the desired track numbers
Total playing time ÷ The total number of tracks and the total playing time of them will be displayed. ÷ When a disc is inserted and the top cover is closed in stop mode, playback starts automatically.

Track number

4Start playback.
Track number

in the order you want to play them.
1 Select a track...
Track number
4 ¢

To clear the programmed contents Press the STOP 7 key.

Programmed order ÷ Press the PROGRAM key repeatedly until the programmed order you want to change is displayed. Programmed order

When operating the unit with 2 alkaline batteries (Alkaline batteries are not provided with this unit)
1Open the battery
2 1
cover.

÷ Make sure the positive (+) and negative (-) poles are properly aligned.

2Insert disc and close the top cover.
Charging the rechargeable batteries
Insert with labeled side up.

Elapsed time of track being played ÷ The power comes on and playback begins.

To turn power off
2 and enter it.
÷ After stopping playback, press the STOP 7 key again. The following program sequence will be displayed. ÷ Repeat steps 1 and 2 and enter the Track Nos. into the program in order. ÷ Up to 20 tracks can be programmed in this unit, but not more than 20 tracks.

3Enter the track number you want to
change.
1 Select a track...
4 ¢

÷ The "PGM" indicator is turned off when the program is cleared. However, the programmed contents are stored. ÷ Program mode can be canceled when the STOP 7 key is pressed or the top cover is open while stop status is engaged. The programmed contents are cleared.

2Insert 2 alkaline batteries
and close the cover.

1Plug in the AC adaptor
to start charging.

2After the batteries have
been charged, remove the AC adaptor.

÷ Secure the disc by pushing a position near the center hole unit it clicks.

5Adjust the volume.

Charging in progress ÷ Make sure the positive (+) and negative (-) poles are properly aligned. ÷ Use commercially available LR03 batteries. The unit may not operate normally if manganese batteries are used. ÷ Replace both batteries at the same time.

Charging completed

Auto power-off function
÷ Close securely by pushing the front center position of the top cover unit it clicks. To increase volume To decrease volume If no operation key has been pressed for 30 seconds while the unit is in the stop mode, the power is turned off automatically to prevent battery power consumption.

Hold function
2 and enter it.
The operation keys of the main unit are deactivated. This position prevents undesired operation when the unit is put in a bag, etc.

Never use an alkaline battery and non-alkaline battery together.

Blinks

Goes off

Playback from desired track
Skipping tracks
Press the SKIP/SEARCH 4 key or ¢ key. To skip backward To skip forward

Selecting Play Mode
Press during playback or stop status. ÷ If Intro Scan or Random Play is selected during stop, Intro Scan or Random play will start when the PLAY/PAUSE 38 key is pressed. ÷ Up to 99 tracks can be played back in Random Play operation. ÷ The program of tracks is also valid in ReThe mode changes each time the P.MODE key is pressed. 1 One-track repeat The track being played or the selected track will be played repeatedly. 2 All-track repeat All tracks on the disc will be played repeatedly. 3 Intro Scan The disc will then begin playing the first ten seconds of all tracks once and then stops automatically. 4 Random play Blinks Slide the B.BOOST switch to select the desired setting : "B.BOOST On" position: Low frequencies are boosted. Blinks "B.BOOST Off" position: Normal tone reproduction. peat or Intro Scan playback.

3Start playback.
When the programmed contents are to be changed further, repeat steps 2 and 3 . ÷ When the HOLD switch on the unit is switched on (HOLD On), the unit's keys cannot be operated.

Operation returns to power off status.

Battery duration indicator
The duration at which the battery indicator starts to blink is variable depending on the type of battery used. Battery duration indicator

÷ When using a rechargeable battery which is new or which has not been used for more than 2 months, the operating period may be shorter than nomal. This is due to the properties of the battery and not a malfunction. After recharging, use the battery on the unit until it is exhausted. The original performance of the battery performance can be recovered by repeating this cycle a few times. ÷ Be sure to close the top cover of the unit before proceeding to recharging.

Connections
Ensure that the power of all components is off before connecting the cords.

4

¢

Battery Type

Blinking Timing

Treatment

÷ Recharging completes in about 12 hours. Do not attempt to recharge the batteries after this period. ÷ Rechargeable batteries can be recharged. When the playable time per recharge reduces, please newly purchase the optional (NB-3A70) rechargeable batteries.

÷ When the SKIP/SEARCH ¢ key is pressed, playback will skip to the start of the subsequent track. ÷ Each time the key is pressed, playback will skip to the next track. ÷ When the SKIP/SEARCH 4 key is pressed, playback will skip to the start of the track being played back. ÷ Each time the key is pressed, playback will skip to the previous track.

Listening through car audio

Changing the tone
B.BOOST (Bass Boost)
The low frequencies sound, which is felt in headphone, can be boosted.

÷ Connect this unit with a commercially available

Listening through speakers
Speakers with built-in amplifier

Listening through an amplifier with CD input jack
÷ Connect the cable to the amplifier's CD input jacks. ÷ This connection may be impossible with some amplifiers. Amplifer

Rechargeable batteries

When the batteries is nearly exhausted.

In a while, the power will be turned off automatically. Then recharge the batteries.

car audio cassette adapter and insert it into the car audio as shown. For details connection method, read the instruction manual for the car audio cassette adapter.

Insert into cassette deck slot

Alkaline batteries

When the batteries are half exhausted.

Playback is possible while the indicator is blinking.

Never use a rechargeable battery and non-rechargeable battery together.

Fast forward, fast reverse
Hold the SKIP/SEARCH 4 key or ¢ key pressed during playback.

Car cassette adaptor (Commercially available)

Fast reverse

4

¢

Fast forward

All tracks on the disc will be played in a random order. 5 Return to normal playback is made. ÷ ñ�2ïbä�ï\é¶�µ���A��� ��ï\é¶��ñ������ �B ÷ If Intro Scan or Random Play is selected while playback is in progress, Intro Scan or Random Play operation will commence when the track being played back is over.

To the LINE OUT jack

÷ Fast forward is engaged by pressing and holding down key SKIP/SEARCH ¢ while playback is in progress. ÷ Fast reverse is engaged by pressing and holding down key SKIP/SEARCH 4 while playback is in progress. ÷ Playback will resume when either key is released.

Notes:

÷ Adjust the listening volume on the connected audio component. ÷ Make sure to switch BASS BOOST off. (The tone ÷ As a result, the audio may be distorted if the volume level is too high in a section dominated by bass sound. In this case, set Bass Boost to off (B.BOOST Off) or decrease the volume. should be adjusted only on the connected audio component.)

�

DPC-X337 (EN)