Remove the IH harness cover ( 1 screw ). Remove the IH unit ( 1 screw and 1 washer ) while pulling out the IH harness cable through the opening. Note : The IH unit is engaged with the chassis frame by the projection. When removing the IH unit from the chassis, slide the IH unit in the arrow direction. Caution 1 : When handling the IH unit, do not push and damage the surface of the thermostat, or the thermostat may not operate properly.
Caution 2: When rewiring the IH cable or reinstalling the IH unit, make sure that the IH unit moves smoothly to the arrow (A) direction by a finger and returns smoothly to the washer position. If not so, check the IH cable wiring.
(7)
Remove the IH shield cover while releasing the 2 hooks from the chassis ( 1 screw ).
