OKI DP500
Manual de Servicio

5

6

Insert the tweezers in the space between U_Cover Assy and CSF Cover_L, remove the CSF Cover_L. Next, pull out FAN cable from the connector of power supply.

Insert the tweezers through the opening of lower part of left side of U_Cover Assy and move tweezers in the direction of the arrow until clicks. And remove U_Cover Assy.

2.2

Detaching of Main_PCB

1

2

Remove the DC_Tape from the connector on the Main_PCB side and the screw-driver is inserted from the hole shown in Figure.

Remove the screw (M3*L6TP) in the place of the arrow.

EM26522.DOC 7/71