DENON DN-D9000
Manual de Usuario

ENGLISH

14 MEMO (Custom Setting Memory)
CD setting information can be stored in the non-volatile memory. The stored information can be called out of the memory later, making it easy to prepare for your mixing. 1. About MEMO � Up to 5000 memo points can be stored to internal memory for later recall. The number of tracks on a particular CD only limits the amount of memo points available per that disc. Example: If your CD has 22 tracks, you can only save up to 22 memos. (1 memo group per track.) CAUTION: 5000 is the maximum possible number of tracks that can be stored to memory. However, to simplify the MEMO operations, the memory system manages each 1250 MEMO data package as a minimum unit (the total 5000 memory capacity divided into 4 package units). When you want to clear just one MEMO data in the 1 MEMO CLEAR mode (see page 21), the unit will erase the memo information but not the internal memo allocation number. Accordingly, depending on conditions, the number of tracks that can be stored in the memory may be fewer than 5000. Once you reached 5000 stored points, you will see a message that says �MEMO FULL!� . At this time you will need to �delete� old data to make room for new memo points. Therefore the oldest 1250 memo points will be deleted and become clear. � Some data can be set and recalled from the memory in the Alpha-mode as well. � The MEMO indicator on the display lights up when a track for which data is stored in the memory is selected. 2. MEMO ITEMS The following items are max to be stored under 1 memory bank: q Cue and Alpha-Cue point w A1-B1 and A2-B2 points e A3-B3, A4-B4 points and A3/4 mode (not stored in the sampler mode) r Playing pitch, pitch on/off, Key Adjust on/off setting 3. MEMO MODE SELECT q Push the MEMO button in Cue mode to enter MEMO mode. w Turn the PARAMETERS knob to select the various MEMO modes from as follows. Memo Set, MemoCall, Memo Clr Depending on conditions, some modes cannot be selected. e Push the MEMO button again to exit MEMO mode. (1) Storing data in the memory [Memo Set] � After make the settings to be stored in the memory, then push CUE button. � When MEMO indicator on the display is off in Cue mode, push MEMO button to enable Memo set function. � If MEMO indicator lights up, it is necessary to clear existing Memo before store new Memo. � At last push PARAMETERS knob to fix. You can see �COMPLETE� message and MEMO indicator lights up. MEMO FULL � If the memory is full and no more data can be stored, �Memo Full!� and �Del 1250?� message appears. � In this case, you need to clear memory of First 1250s Memo (number 1 to 1250) at a time to make space for new memos. � To make space, push PARAMETERS knob while �Del 1250?� message is displayed. � �Delete OK?� message appears then push PARAMETERS knob again to execute clearing. � After the first 1250s Memo (number 1 to 1250) are cleared, number after 1251 Memo are renumberd as new 1, 2, 3�(now you have new 1250 empty space.). (2) MEMO Call [Memo Call] � When the CD includes tracks that DN-D9000 has Memo is inserted, MEMO indicator flashes 5 seconds. � To call out the Memo data, select the track that you made MEMO. Then MEMO indicator lights up. � Push the MEMO button to enable Memo call function. � When the PARAMETERS knob is pushed in the Memo call mode, all the data stored in the memory is loaded. DN-D9000 goes to standby mode at the called Cue point.

� When the playing pitch is loaded from the Memo with PITCH LED flashes, playing Pitch is locked until Pitch Slider comes same Pitch. While playing Pitch is locked, PITCH LED keeps flashing. Memo Call in Alpha-Mode � In the Alpha-Mode, Memo call function can be used when main track is not Cue. And Memo call function can be used without changing the main track operations. (3) 1 MEMO CLEAR [Memo Clr] � To clear one Memo data, select the track that you made MEMO. Then MEMO indicator lights up. � Push the MEMO button to enable Memo clear function. � When the PARAMETERS knob is pushed in MEMO CLEAR mode, the Memo data is cleard and the MEMO indicator on the display turns off. ALL MEMO CLEAR � All memory data can be cleared. � For instructions, see ��5 PRESET (12) All MEMO CLEAR�. 4. Copying all MEMO � The MEMO data can be copied between DN-D9000s. � Also DN-2600F MEMO data can be copied onto the DN-D9000. � For instructions, see ��5 PRESET (13) MEMO ALL COPY�.

21