n Setting the White Balance manually (White set p) Use this mode when you want to set the white balance manually. 1 Set to [p] (White Set) and then press q. 2 Select [:] (White set 1) or [;] (White set 2) and then press q. 3 Aim the camera at a sheet of white paper or a similar white object so that the frame on the center of the screen turns white and then press q.
WHITE SET
About the white balance � This is fixed to [AUTO] in Auto mode [0]. � When taking a picture with the flash, the white balance will be automatically adjusted [except for [k] (Daylight)], but the white balance may not be properly adjusted if the photo flash is insufficient. About the white balance fine adjustment � The white balance icon on the screen turns red or blue if you have performed white balance fine adjustment. � You can set the value independently for each of the modes in white balance. � The setting on the fine adjustment of the white balance is reflected to the picture when taking a picture with the flash. � If you change the white balance setting for set mode [p], the white balance fine adjustment values for [:] and [;] return to �0�. � When the color effect is set to any of [COOL], [WARM], [B/W] or [SEPIA] (P78), you cannot finely adjust the white balance. About the white set � After starting white set, do not move the camera or the subject until you return to the menu.
SET
CANCEL MENU
n Finely Adjusting the White Balance (White Balance Fine Adjustment L) When you cannot acquire the desired hue by setting the white balance, you can adjust the white balance finely. 1 Set the white balance to [k]/[l]/ [m]/[:]/[;]. (P71) 2 Press e several times until [L WB ADJUST.] appears.
WB ADJUST. RED BLUE
SELECT
EXIT
3 Finely adjust the white balance. � q [BLUE]: Press when the hue is reddish. � w [RED]: Press when the hue is bluish.
