PIONEER DJM-700-S/RLXJ
Manual de Usuario

EFFECT FUNCTIONS

EFFECT PARAMETERS
Beat Effect (*1)
Name 1 DELAY 2 ECHO (*2) 3 TRANS 4 FILTER Beat Switch Parameter Sets delay time of 1/8 to 16/1 per 1 beat of BPM time. Sets delay time of 1/8 to 16/1 per 1 beat of BPM time. Sets cut time of 1/16 to 16/1 per 1 beat of BPM time. Cycle of cutoff frequency shift is set in unit of 1/4 to 64/1 relative to 1 beat of BPM. Cycle of flanger shift is set in units of 1/4 to 64/1 relative to 1 beat of BPM. Cycle of phaser effect shift is set in units of 1/4 to 64/1 relative to 1 beat of BPM. Parameter 1 (TIME dial) Contents Setting Range (unit) Sets delay time. Sets delay time. Sets effect time. 1 to 4 000 (ms) 1 to 4 000 (ms) 10 to 16 000 (ms) Parameter 2 (LEVEL/DEPTH dial) contents Sets balance between original and delay sound. Sets balance between original sound and echo sound. Sets balance between original sound and effect sound. Amount of effect increases when dial is turned clockwise. Amount of effect increases when dial is turned clockwise. When dial is turned fully counterclockwise, only original sound is output. Amount of effect increases when dial is turned clockwise. When dial is turned fully counterclockwise, only original sound is output. Sets balance between original sound and effect sound. Amount of effect increases when dial is turned clockwise. Amount of effect increases when dial is turned clockwise. When dial is turned fully counterclockwise, only original sound is output. Sets balance of original sound and roll sound. Sets balance of original sound and roll sound. Sets balance of original sound and roll sound. Sets balance of original sound and roll sound. Sets volume of RETURN input sound.

Sets cycle for cutoff 10 to 32 000 (ms) time shift. Sets cycle for flanger effect shift. 10 to 32 000 (ms)

5 FLANGER

6 PHASER

Sets cycle for phase 10 to 32 000 (ms) effect shift.

7 REVERB (*2) 8 ROBOT

Amount of reverberation is set Sets amount of 1 to 100 (%) from 1 % to 100 %. reverberation effect. Sets pitch of robot sound effect within range of �100 % to +100 %. Sets pitch of robot sound effect. �100 to +100 (%)

9 CRUSH

Cycle of crush effect Sets cycle for crush 10 to 32 000 (ms) movement is set to 1/4 to 64/1 effect shift. relative to a single beat of BPM. Effect time is set as 1/16 to 16/1 Sets effect time. relative of 1 beat of BPM. Effect time is set as 1/16 to 16/1 Sets effect time. relative of 1 beat of BPM. 1 to 4 000 (ms) 1 to 4 000 (ms) 1 to 4 000 (ms) 1 to 4 000 (ms) �

10 ROLL (*2) 11 REVERSE ROLL (*2)

12 UP ROLL (*2) Effect time is set as 1/16 to 16/1 Sets effect time. relative of 1 beat of BPM. 13 DOWN ROLL Effect time is set as 1/16 to 16/1 Sets effect time. (*2) relative of 1 beat of BPM. 14 SEND/ RETURN � �

(*1) When the effect channel selector is set to [CF.A], [CF.B], or [MASTER], even if the effect monitor is turned ON, if the selected channel�s sound is not output to the master output, the effect sound will not be heard. (*2) When effect is disabled (OFF), the effect sound will not be heard, even if monitor is set to effector.

20
En