PIONEER DJM-3000/KUCXCN
Manual de Usuario

USING THE EFFECT MIX FUNCTION

Effect Mix Auto Mode
1 Using the CROSS FADER ASSIGN switches (A and B) choose the channel (CH1�CH4) connected to the CD player you wish to use with cross fader effects.
¶ Be sure to assign different channels to the CROSS FADER ASSIGN switches A and B.

4 Use the Effect select/start switches to choose the desired effect (ECHO, ZIP, ROLL).
¶ The selected Effect select/start switch will flash and the others will light steadily. ¶ If the Effect select/start switch is pressed during output of the A side sound, the selected effect will be applied to A, and after the preset effect time has elapsed, sound B will be output. ¶ If the Effect select/start switch is pressed during output of the B side sound, the selected effect will be applied to B, and after the preset effect time has elapsed, sound A will be output. [Operation if Cross fader lever is midway when the Effect Mix Auto mode is turned on] ¶ If the Effect select/start switch is pressed when both A and B sounds are being output, the selected effect will be applied to B, and after the preset effect time has elapsed, sound A will be output. ¶ If the Cross fader lever is moved toward either side A or B when both A and B sounds are being output, the ordinary cross fader operation will occur. ¶ Two or more effects cannot be selected at the same time. ¶ The BEAT EFFECT�s effect PARAMETER controls can be used to modify the effect time settings. ¶ In the Effect Mix Auto mode, the Cross fader lever cannot be used to control sound. The CROSS FADER CURVE selector switch will also be disabled, and BEAT EFFECTS cannot be used.

2 Set the Cross fader lever to the Effect Mix Auto mode starting position.
In the Effect Mix Auto mode, the way the sound is initially heard is determined by the position of the Cross fader lever. For operating procedures, see step 4. ¶ When the Cross fader lever is near the midway point, sound will be output from both A and B. ¶ When the Cross fader lever is on the A side, sound will be output from A. ¶ When the Cross fader lever is on the B side, sound will be output from the B side.

3 Set the EFFECT MIX selector switch to AUTO.
¶ Of the three Effect select/start switches (ECHO, ZIP, ROLL), the selected one will flash, and the others will light steadily. ¶ The FADER START switch for the assigned channel will automatically turn ON and its indicator will light. If the settings of the CROSS FADER ASSIGN switches A/ B are changed after setting the EFFECT MIX selector switch to AUTO, the corresponding channel�s FADER START switch will automatically turn ON.

25
<DRB1314>