ALINCO DJ-596T
Manual de Servicio

Reference frequency adjustment 1. In the adjustment mode, select channel 1 by rotating the main tuning dial.
2. Press the key to start transmission. 3. Rotate TC1 on the main board until the value on the frequency counter matches the one displayed on the LCD.

UHF high-power adjustment 1. In the adjustment mode, select channel 2 by rotating the main tuning dial.
2. Hold down the key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the value closest to 4.5W by rotating the main tuning dial. 4. When the key is released, the output power at that time will be stored as the high power setting.

UHF low-power adjustment 1. In the adjustment mode, select channel 3 by rotating the main tuning dial.
2. Hold down the key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the value closest to 0.8W by rotating the main tuning dial. 4. When the key is released, the output power at that time will be stored as the low power setting.

VHF high-power adjustment 1. In the adjustment mode, select channel 4 by rotating the main tuning dial.
2. Hold down the key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the value closest to 4.5W by rotating the main tuning dial. 4. When the key is released, the output power at that time will be stored as the high power setting.

VHF low-power
1. In the adjustment mode, select channel 5 by rotating the main tuning dial. 2. Hold down the key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the value closest to 0.8W by rotating the main tuning dial. 4. When the key is released, the output power at that time will be stored as the low power setting.

28