PIONEER DEH-P4850MP/XN/ES
Manual de Usuario

Section

04

Tuner

Listening to the radio
1 2

4 To perform manual tuning, briefly press c or d. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

4

3

These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. 1 Band indicator Shows which band the radio is tuned to, AM or FM. 2 Frequency indicator Shows the frequency to which the tuner is tuned. 3 Preset number indicator Shows which preset has been selected. 4 Stereo (5) indicator Shows when the selected frequency is being broadcast in stereo. 1 Press SOURCE to select the tuner. Press SOURCE until you see TUNER displayed. 2 Use VOLUME to adjust the sound level. Rotate it to increase or decrease the volume. 3 Press BAND to select a band. Press BAND until the desired band (FM1, FM2, FM3 for FM or AM) is displayed.

# You can cancel seek tuning by briefly pressing c or d. # If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button. Note When the frequency selected is being broadcast in stereo the stereo (5) indicator will light.

10

En