PIONEER DEH-P4550/XN/ES
Manual de Usuario

Section

HHHHHHHHHHHHHH Audio Adjustments

07

Fine adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-L/EQ-M/EQ-H).

Note If you make adjustments, CUSTOM curve is updated.

Level (dB) Q=2N Center frequency Q=2W

Adjusting bass and treble
You can adjust bass and treble settings. ! If EQ-EX function has been selected and only when EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can adjust bass and treble settings. ! If SFEQ has been set to FRT1, bass adjustment affects only the rear output: front output cannot be adjusted. ! If SFEQ has been set to FRT1 or FRT2, treble adjustment affects only the front output: rear output cannot be adjusted.

Frequency (Hz)

1 Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display. 2 Press AUDIO to select the band for adjustment from among low, mid and high. Press AUDIO repeatedly to switch between the following functions: LowMidHighB (bass adjustment)T (treble adjustment)

# If EQ-EX function has been selected and only when EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can switch to B and T.

Adjusting bass and treble level
You can adjust the bass and treble level. 1 Press AUDIO to select B. Press AUDIO until B appears in the display.
# If the treble level has been previously adjusted, T will be displayed.

3 Press c or d to select the desired frequency. Press c or d until the desired frequency appears in the display. Low: 4080100160 (Hz) Mid: 2005001k2k (Hz) High: 3k8k10k12k (Hz) 4 Press a or b to select the desired Q factor. Press a or b until the desired Q factor appears in the display. 2N1N1W2W

2 Press c or d to select bass or treble. Press c and B is displayed. Press d and T is displayed. 3 Press a or b to adjust the level. Each press of a or b increases or decreases the selected bass or treble level. +6  6 is displayed as the level is increased or decreased.

Selecting bass frequency
You can select the bass frequency for level adjustment.

26

En