|
Usuarios conectados
Actualmente hay 5985 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Section
Operating this unit Tuner
Listening to the radio
Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 11).
02
Tuning in strong signals
Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press FUNCTION to select LOCAL.
1
Press SOURCE to select the tuner.
2 Press a or b to turn local seek tuning on or off. 3 Press c or d to set the sensitivity. FM: LOCAL 1�LOCAL 2�LOCAL 3� LOCAL 4 AM: LOCAL 1�LOCAL 2 The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.
2 Press BAND to select a band. Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed. 3 To perform manual tuning, briefly press c or d. 4 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
# You can cancel seek tuning by briefly pressing c or d. # If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequencies with the touch of button. ! Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6. 1 Press FUNCTION to select BSM.
Storing and recalling broadcast frequencies
% When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing. Memorized radio station frequency can be recalled by pressing the preset tuning button.
# Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory. # You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 1 to 6.
2 Press a to turn BSM on. Six strongest broadcast frequencies will be stored in the order of their signal strength.
# To cancel the storage process, press b.
English
Built-in Player
Playing a disc
1 Insert a CD (CD-ROM) into the disc loading slot. Playback will automatically start.
# Be sure to turn up the label side of a disc. # After a CD (CD-ROM) has been inserted, press SOURCE to select the built-in CD player.
En
7
|
|
|
> |
|