PIONEER DEH-2950MP/XN/ES1
Manual de Usuario

Section

01
2

Before You Start
Grab the front panel and remove.

CAUTION
! Use only one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic materials. ! In the event of battery leakage, wipe the remote control completely clean and install a new battery. ! When disposing of used batteries, please comply with governmental regulations or environmental public institutions� rules that apply in your country/area.

3 Put the front panel into provided protective case for safe keeping.

Attaching the front panel
1 Slide the front panel to the left until it clicks. Front panel and the head unit are jointed on the left side. Make sure that the front panel has been jointed to the head unit. 2 Press the right side of the front panel until it is firmly seated.
# If you can�t attach the front panel to the head unit successfully, try again. Front panel may be damaged if you attach the front panel forcedly.

Using the remote control
Point the remote control in the direction of the front panel to operate.
Important ! Do not store the remote control in high temperatures or direct sunlight. ! The remote control may not function properly in direct sunlight. ! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.

Use and care of the remote control
Installing the battery
Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus (�) poles pointing in the proper direction.

WARNING
Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

4

En