MITSUBISHI DD8030
Manual de Servicio

<Tray Panel Removal> 1. Eject the tray (1). (Refer to item 1-1-2.) 2. Twist the tray panel (2) a little in the arrow A direction with the tray (1) hold by hand to release two claws and lift up the tray panel (2) in the arrow B direction, then the tray panel (2) is removed. 3. When mounting the tray panel (2), insert the tray panel (2) along the grooves of the both sides of the tray (1) until clicking.
B
Tray (1) B

1-1-4. Tray 1. Pull out the tray (1) towards you until it stops. 2. Lift up claw A with a minus screwdriver, and pull out the tray (1) towards you, then remove the tray (1).
Tray (1) Claw A

Mechanism chassis assembly Minus screwdriver Minus screwdriver

Tray panel (2)

A
A

Tray (1) Claw

Tray Panel (2)

Pull out the tray (1) toward you.

Tray (1)

Claw

Fig. 2-1-5

1-1-5. Rear Panel 1. Remove the bush (1). 2. Remove four screws (2), then remove the rear panel (3).
Bush (1)

Fig. 2-1-3 1-1-3. Front Panel 1. Remove one flexible cable (1). 2. Release four claws, then remove the front panel (2).
Screws (2)

Claw

Front panel (2) Flexible cable (1) Claws Claw
Rear panel (3)

Fig. 2-1-4

Fig. 2-1-6