SONY DCRTRV340E
Manual de Servicio

Changing the menu settings
Icon/item REC MODE Mode z SP LP AUDIO MODE z 12BIT 16BIT z AUTO Meaning To record in the SP (Standard Play) mode To increase the recording time to 1.5 times the SP mode To record in the 12-bit mode (two stereo sounds) To record in the 16-bit mode (one stereo sound with high quality) q REMAIN To display the remaining tape bar: � For about eight seconds after your camcorder is turned on and calculates the remaining amount of tape � For about eight seconds after a cassette is inserted and your camcorder calculates the remaining amount of tape � For about eight seconds after N is pressed in PLAYER mode � For about eight seconds after DISPLAY is pressed to display the screen indicators � For the period of tape rewinding, forwarding or picture search in PLAYER mode To always display the remaining tape bar CAMERA PLAYER CAMERA PLAYER* POWER switch CAMERA PLAYER

Customizing Your Camcorder Göra personliga inställningar på videokameran

ON

Notes on the LP mode �When you record a tape in the LP mode on your camcorder, we recommend playing back the tape on your camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in pictures or sound. �When you record in the LP mode, we recommend using a Sony cassette so that you can get the most out of your camcorder. �When you record in the SP and LP modes on one tape or you record some scenes in the LP mode, the playback picture may be distorted or the time code may not be written properly between scenes. Note on AUDIO MODE When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO MIX. *To dub a tape to another VCR You cannot select AUDIO MODE for tapes recorded in the Digital8 system. You, however, can select AUDIO MODE when you dub tapes recorded in the Hi8/standard 8 system to another VCR using the i.LINK cable. (continued on the following page)

135