Types of trouble and how to correct trouble Others
Symptom A title is not recorded. Cause and/or Corrective Actions � The cassette has no Cassette Memory. c Use the cassette with Cassette Memory (p. 101). � The Cassette Memory is full. c Erase unnecessary title (p. 102). � The cassette is set to prevent accidental erasure. c Slide the write-protect tab so that red portion is not visible (p. 198). � The tape has a blank portion in the recorded portion. c Superimpose the title to the recorded portion (p. 101). A cassette label is not recorded. � The cassette has no Cassette Memory. c Use the cassette with Cassette Memory (p. 104). � The Cassette Memory is full. c Erase unwanted data (p. 105). � The tape is set to prevent accidental erasure. c Slide the write-protect tab so that red portion is not visible (p. 198). Digital program editing to the tape � The input selector on the VCR is not set correctly. does not function. c Set the selector correctly, then check the connection between the VCR and your camcorder (p. 81, 92). � Your camcorder is connected to DV equipment of other than Sony using the i.LINK cable. c Set it to IR (p. 85). � Setting program on a blank portion of the tape is attempted. c Set the program again on a recorded portion (p. 90). � The synchronization of your camcorder and the VCR is not adjusted. c Adjust the synchronization of the VCR (p. 88). � The IR SETUP code is not correct. c Set the correct code (p. 87). Digital program editing to the � Setting program on a blank portion of the tape is �Memory Stick� does not function. attempted. (DCR-TRV22/TRV33 only) c Set the program again on a recorded portion (p. 130). The Remote Commander supplied � COMMANDER is set to OFF in the menu settings. with your camcorder does not c Set it to ON (p. 184). work. � Something is blocking the infrared rays. c Remove the obstacle. � The batteries are inserted in the battery holder with the + � polarities not matching the + � marks. c Insert the batteries with the correct polarity (p. 217). � The batteries are dead. c Insert new ones (p. 217). The picture from a TV or VCR � DISPLAY is set to V-OUT/LCD in the menu settings. does not appear even when your c Set it to LCD (p. 184). camcorder is connected to the outputs on the TV or VCR.
