SONY DCR-TRV318
Manual de Usuario

Superimposing a still image in the �Memory Stick� on an image � MEMORY MIX Recording superimposed images on a tape
Before operation �Insert a tape for recording into your camcorder. �Insert a �Memory Stick� containing still images into your camcorder.

(1) Set the POWER switch to CAMERA. (2) In the standby mode, press MEMORY MIX. The first recorded image appears in the bottom-right corner of the screen as a thumbnail image. The last image that is used in MEMORY MIX will be displayed next time. (3) Press MEMORY+/� to select the still image you want to superimpose. � : To see the previous image + : To see the next image (4) Turn the SEL/PUSH EXEC dial to select the desired mode. The mode changes as follows: M. CHROM y M. LUMI y C. CHROM y M. OVERLAP (5) Press the SEL/PUSH EXEC dial. The still image overlaps with the picture on the screen. (6) Turn the SEL/PUSH EXEC dial to adjust the effect. M. CHROM � The degree of the blue areas in the still image which is to be swapped with a moving picture M. LUMI � The brightness of the area in the still image which is to be swapped with a moving picture C. CHROM � The degree of the blue areas in the moving picture which is to be swapped with a still image M. OVERLAP � No adjustment necessary The fewer bars there are on the screen, the stronger the effect becomes. (7) Press START/STOP to start recording.
START/STOP
MEMORY MIX

�Memory Stick� Operations � Recording

2

4
M. CHROM

M. LUMI

101

101�0021

101

5 3

M. LUMI I I I � � � �

101�0021

Still image

101

101�0021

6

M. LUMI I � � � � � �

101

101�0021

141