Adding sound to pictures
You can attach sound to a selected picture at any time while reviewing your pictures from either the �lmstrip or full screens.
4
You can only add sound to or play sound associated with burst and
timelapse pictures when the series is collapsed.
1 Scroll to view the picture you want to select.
Use any of the three methods described in the �Viewing pictures� section on page 4-5.
2 Press and hold the RECORD button.
The microphone icon appears on the screen along with how long you have been recording.
Each picture can have only one attached
sound clip. If you attempt to attach a second sound clip to a picture, a message appears allowing you to delete the existing sound.
3 Speak into the microphone on the back of the
camera.
4 Release the RECORD button.
If the camera�s volume
control is turned down, you will not be able to hear the sound you have recorded.
A sound icon appears indicating the picture now has attached sound. If a picture has attached sound, pressing the DELETE softkey allows you to delete the sound alone or both the picture and sound.
Reviewing
The volume control
adjusts the volume of sound clips attached to pictures only. You can turn off System Sounds through Capture Preferences on page 3-10.
5 Press the softkey of your choice.
DELETE�Deletes the sound. SAVE�Saves the sound. PLAY�Plays the sound. Refer to �Playing sound, bursts, and timelapse sequences� on page 4-14 for information on playing sound that has not been newly recorded. 4-11
