FUNAI D8D-M1000DB
Manual de Usuario

E8GA4ED(EN).fm Page 20 Friday, December 22, 2006 5:46 PM

Stereo Sound Mode
CD

1) During playback, press AUDIO repeatedly to select �STEREO�, �L-ch� or �R-ch�. STEREO : Both right and left channels are active (stereo). L-ch : Only left channel is active. R-ch : Only right channel is active. Virtual Surround
DVD-V CD MP3

�If SKIP H G are pressed while the playback is paused, the playback will be paused again after skipping to the next track. �During Dual Playback, using SKIP H G will only affect MP3 tracks. �To skip JPEG files, use s or B. If the �SLIDE SHOW� is set to �MUSIC�, SKIP H G are available for both MP3 and JPEG files. Note: � SKIP H G are not available when playback is stopped. Chapter / Title Search
DVD-V Using SEARCH

You can enjoy stereophonic virtual surround effects on your existing stereo system. 1) During playback, press MODE repeatedly. �For MP3 and Audio CDs, press MODE once.
OFF

1) During playback, press SEARCH once for the Chapter Search, twice for the Title Search.
/29

2) Press ENTER to change a value to �1� (natural effect), �2� (emphasised effect) or �OFF� (original sound). 3) Press MODE or RETURN to exit. Note: � Virtual Surround will not be effective if the sound mode is set to something other than �STEREO� (for Audio CDs only). (Refer to �Stereo Sound Mode�.) � Turn down the level or turn it �OFF� if the sound is distorted. � The setting will be saved even if this unit is turned off. � This function cannot be used during x1.3 and x0.8 Rapid Play with Voice. (Refer to page 18.) Track Search
CD MP3 JPEG DivX®

2) Enter the desired chapter/title number using the Number
buttons.

Using the Number buttons

1) During playback, press the Number buttons to enter the desired chapter number. �Playback will start at the selected chapter. �For single digit chapters (1-9), press a single number (e.g. to play chapter 3, press 3). �To play chapter 26, press +10, 2, 6. Note: � Depending on the disc being played, using the Number buttons cannot be performed.
Using SKIP H G

There are three ways to begin the playback of a specific track on a disc.
Using the Number buttons

1) Press the Number buttons to enter the desired track number. �Playback will start at the selected track. �For any discs, to play a single-digit track, press the number directly (e.g. for track 3, press 3). �For the disc with less than 100 tracks, to play a doubledigit track, press +10, then the number (e.g. for track 26, press +10, 2, 6). �For the disc with more than 100 tracks, to play a doubledigit track, press +10, 0, then the number of the track. (e.g. for track 26, press +10, 0, 2, 6). To play a tripledigit track, press +10, then the number of the track (e.g. for track 126, press +10, 1, 2, 6).
Using SEARCH

During playback, press SKIP G to go to the next chapter. Press it repeatedly to skip subsequent chapters. Press SKIP H to go back to the beginning of the current chapter. Press it repeatedly to go back to the previous chapter. Time Search
DVD-V CD DivX®

1) During playback, press SEARCH repeatedly until the Time Search screen appears on the TV screen.
TOTAL 1:29:00

2) Within 30 seconds, enter a desired disc time using
the Number buttons.

1) Press SEARCH. �The Track Search display appears. 2) Within 30 seconds, select a desired track number using
the Number buttons.

�Playback will start at the selected track. �For the disc with more than 10 but less than 100 tracks, to play a single-digit track, press 0 first, then the number of the track (e.g. for track 3, press 0, 3). �For the disc with track, than 100 tracks, to play a single or a double-digit more press 0 first, then the number of the track (e.g. for track 3, press 0, 0, 3 and for track 26, press 0, 2, 6). �In any other cases, just press the number of the track.
Using SKIP H G

�Playback will start at the specified time. �For DVDs, enter a desired time of the current title. �For Audio CDs and discs with DivX® files, enter a desired time of the current track. �Press CLEAR to erase the incorrect input. Note: � �0� appears automatically when there is no need to enter a number. For example, �0:0_:_ _� appears in the Time Search display if the total time of the disc or track is less than 10 minutes. Time Search is not available on some discs. � Marker Setup
DVD-V CD

Use markers to memorise your favourite places on a disc. 1) During playback, press SEARCH repeatedly until the Marker Setup screen appears on the TV screen.

During playback, press SKIP G to move to the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to the beginning of the current track. Press it repeatedly to go back to the previous tracks.

20

EN